The Highest Performing, Lowest Cost Soundproofing Glue for DIY

ShareSend to FacebookTweet ThisEmail ThisPrint This

QuietGlue Pro

QuietGlue Pro is the highest performing, lowest cost soundproofing compound on the market, designed to be very cost effective for do-it-yourself projects. QuietGlue Pro damping compound is fast, easy to use, and it works.

Independent lab tests prove that just one layer of QuietGlue Pro between two layers of drywall dissipates more noise than other leading brands.

Application is easy:

  • Cut the drywall to spec.
  • Apply QuietGlue Pro with any standard caulking gun.
  • Screw into existing wall or new drywall and enjoy.

QuietGlue Pro delivers fantastic performance across all frequency bands and outperforms other brands at up to 32% lower cost per tube.

QuietGlue_Pro_Group300x295Important Resources

download  Answering Green Glue Noiseproofing Compound Misleading Claims

For large quantities please call us for volume discounts at 1-800-797-8159.

QuietGlue Benefits

  • Proven highest noise-reducing performance compared to other noiseproofing compounds
  • Easy to use
  • Ideal for use with virtually any kind of wood or drywall
  • Does not require special training
  • Low VOC, water-based compound, solvent-free
  • Lab tested in accordance with ASTM D3273 and E90

download  QuietGlue Pro Application Instructions

 

Prepare Assembly

Apply QuietSeal around any electrical boxes, exposed seams (if any), or other penetrations on the existing assembly.

Cut panels for the second layer to fit around electrical boxes or other openings (as necessary). For best results use QuietPutty around all electrical boxes. Make sure the drywall surfaces are clean and free of loose fibers like sawdust.

Cutting an Opening on the QuietGlue Pro Tube

Cut Tube Top

Cut top of tube and attach nozzle to the opening

  

Cut Nozzle Tip

Cut the tip of the nozzle creating an opening of 1/4" - 3/8”.

Applying QuietGlue Pro

Leave Edge Clearance

Leave a 1”–2” edge around the drywall panel for easier handling.

  

Cover 50 Percent

Apply QuietGlue Pro evenly on the panel with a thickness of 3/8”.

newqgdrawing245

  

QuietGlue should evenly cover 10% - 20% of the entire surface area of panel. (Tubes: Two 28 oz. tubes per 4’X8’ sheet; 1 Gallon: 73 sqft/gallon).

Installing the Panel

Add Second Layer

Before placing the second layer, apply QuietSeal around the perimeter of the existing wall.

Place second layer of panel on top of existing layer, sandwiching the QuietGlue Pro in between. Insert screws along the edge about every 12 inches, as well as through the studs. Screws used should penetrate at least 1" into a wooden stud, or 5/8" into steel studs. (If possible, stagger the seam for best acoustic performance.)

Finish assembly as desired. Wait 24-48 hours before painting, sealing, or applying any other liquid components

Use normal care and precaution when working with Serious Energy products

  • QuietGlue Pro begins to dry within 5 minutes after application to any surface. However, it requires a full 15 days to completely dry, after which the full sound damping capability of your new wall or ceiling will be achieved.
  • Cure time is 24-48 hours. Tack-free time is 15 minutes.
  • Cleanup with soap and water.
  • Follow all OSHA guidelines when completing any construction project.
  • QuietGlue Pro contains no hazardous materials. Dispose of excess QuietGlue Pro in the same responsible manner as you would any building material.

©2002-2011 Serious Energy Inc. 1250 Elko Drive Sunnyvale, CA 94089